Article
Oct 6, 2026
How to Find Decision-Makers at Any Company
Finding the decision-maker means mapping a buying committee of 6 to 13. How to identify the budget holder, find verified contacts, and multi-thread.

The phrase the decision-maker is misleading in 2026, because for most B2B purchases there is no single one. A typical buying decision now runs through a committee, and finding the decision-maker really means mapping that group and identifying who holds the budget authority inside it. Research puts the average B2B buying committee at six to thirteen stakeholders depending on deal size, each arriving with their own independent research, which is why betting a deal on one contact is the fastest way to stall it.
That reframing matters because the old approach of finding one name and pitching it underperforms badly now. One contact means one no can end the deal, while engaging several stakeholders closes deals roughly twice as fast. This guide covers how to find decision-makers at any company in the way that actually works today: understanding who sits on the committee, identifying the real budget holder, finding verified contact data for each, and reaching them without relying on a single thread.
There usually is not one decision-maker

The starting point is accepting that a modern B2B decision is a group decision. Gartner's research puts the typical committee at six to ten people, and Forrester's more recent figure is closer to thirteen, spanning multiple departments, with each member bringing four to five pieces of their own research to the table. Single-contact prospecting consistently underperforms against this reality, because it reaches one perspective in a room full of them.
The practical consequence is that targeting one person per account is a mistake, since multi-threading three or more stakeholders closes deals roughly twice as fast as relying on a single champion. So the goal is not to find the decision-maker and stop, but to map the group, identify who actually controls the budget, and build enough coverage that one person's hesitation does not sink the deal. Everything that follows serves that goal.
Who sits on the buying committee
A committee looks less chaotic once you know the roles, which are fairly predictable across companies. The economic buyer controls the budget and signs off on spend, usually a VP, director, or C-suite leader with profit-and-loss responsibility, and this role is the closest thing to the decision-maker in the traditional sense. The technical buyer vets the fit, running the integration and security review, and can block a deal on practical grounds even when the economic buyer is sold. The user buyer is whoever will use the product day to day and cares most about whether it actually helps them.
Around those sit the people who shape the decision without formally owning it. The champion is the person who first raised the problem internally and advocates for your solution, and they are your most valuable contact and the one you most often over-rely on, because a champion is frequently not the decision-maker and a weak champion cannot carry a deal even when they love you. A blocker or gatekeeper can slow or stop the process, and an executive sponsor lends weight from above. Knowing which role a contact plays is what tells you how to talk to them, since the economic buyer wants a business case while the technical buyer wants proof of fit.

How to identify the real decision-maker
Identifying the budget holder follows a clear sequence. Start by mapping who owns the pain your product solves, since the person feeling the problem most acutely is usually close to the budget for fixing it. From there, research the company's org structure to understand the reporting lines and who sits above that pain, and then confirm actual budget authority before you reach out, since a senior title does not always come with spending power. The reliable signal is a VP-or-above role with profit-and-loss responsibility for the relevant area.
Defining your ideal account precisely makes this far easier, because a clear ideal customer profile tells you which titles matter at the companies you target. The mechanics of turning a title into a specific named person, by reading the org structure and searching for the right role rather than a generic one, are the same whether you are in sales or recruitment, and the approach in finding the hiring manager behind a role transfers directly. One shortcut beats all the research: once you have a champion, ask them directly who else is involved in the decision, since a good champion will name the committee for you.
Use signals to find them before they engage
Because buyers do most of their research quietly before contacting any vendor, intent signals are often the only visible trace of committee activity, and they are a powerful way to find decision-makers at the right moment. Events such as a funding round, a leadership hire, a product launch, or a technology change indicate that a company is re-evaluating vendors and budgets right now, which tells you both which accounts to prioritize and that a decision-maker is actively in the market.
Engagement signals surface the hidden stakeholders. Anyone from a target account engaging with your content is a probable committee member, and multiple people from one company viewing your pricing page within a short window is a strong sign that a committee is forming. Watching for these buying signals and layering in intent data turns committee-mapping from guesswork into a data problem, letting you reach the right people when they are actually evaluating rather than at random.
Get verified contact data for each stakeholder
Mapping the committee is only useful if you can actually reach the people on it, and this is where most efforts quietly break. The common failure is that a rep maps ten stakeholders and has working contact information for two, so the multi-threading strategy collapses at the most basic step. Verified contact data for everyone who touches the decision, not just the friendly champion, is the operational foundation of the whole approach.
The practical standard is a candidate list per role with verified emails and, ideally, direct dials, since three possible economic buyers beats one guess when you are not certain who holds the budget. Building this reliably is a matter of combining the right prospecting tools for org mapping, contact discovery, and verification, and keeping the records accurate through enrichment and verification so your outreach lands rather than bounces. Accurate contact data for the full chart is the unglamorous foundation everything else rests on.
Reach them: multi-thread, do not single-thread
With the committee mapped and contactable, the last step is reaching them in a coordinated way. The pattern that works is to start with the champion using a problem-specific angle, then introduce the economic buyer and technical buyer a few touches later, once internal advocacy is already forming, rather than cold-emailing the C-suite first. Each person should get a message tailored to their role, so the economic buyer hears a measurable business outcome while the technical buyer hears about fit and security.
Reaching a committee also takes more than one channel, since a coordinated sequence across email, LinkedIn, and phone outperforms a single touch, which is the core of a multichannel outbound strategy, and choosing which channel suits which stakeholder is covered in cold email versus LinkedIn versus cold calling. Every message should carry real trigger context rather than a generic pitch, which is why a personalized opening tied to something happening at the company earns the reply. Turning those conversations into real opportunities is the next step, covered in turning cold prospects into sales opportunities.
Where single-threading quietly costs you
Relying on one contact per account does more damage than it appears to, because it shows up later as stalled deals and a thinning pipeline rather than an obvious error at the time. A deal built on a single champion dies the moment that person goes quiet, changes jobs, or loses an internal argument, which is a common and avoidable cause of an empty pipeline. It is also a frequent reason an outbound campaign underperforms despite good targeting, since the message reaches someone without the authority to act on it.
Building committee coverage from the start fixes this, and it matters most when you are trying to land your first B2B customers and cannot afford for a promising deal to evaporate because one contact went cold. Prioritizing which accounts and stakeholders to work first, using lead scoring, keeps the effort focused on the committees most likely to buy.
Who is the decision-maker in a B2B sale?
In most B2B sales there is no single decision-maker, but a buying committee of six to thirteen people. The closest role to a traditional decision-maker is the economic buyer, who controls the budget and signs off on spend, usually a VP or above with profit-and-loss responsibility. Around them sit the technical buyer who vets fit, the user who will use the product, the champion who advocates internally, and sometimes a blocker and an executive sponsor. Winning the deal means engaging the budget holder while also getting buy-in across the committee, rather than persuading one person.
How do you find the decision-maker at a company?
Map who owns the problem your product solves, research the company's org structure to see who sits above that pain, and confirm actual budget authority before reaching out, looking for a VP-or-above role with profit-and-loss responsibility. Intent and engagement signals, such as funding news, leadership hires, or several people from one account viewing your pricing page, help you find decision-makers who are actively evaluating. The fastest shortcut is to ask an existing champion directly who else is involved, since they can name the committee for you.
Should you contact multiple people at the same company?
Yes. Targeting one person per account is the fastest way to stall a deal, because a single contact means a single no can end it, and a champion can go quiet or leave. Engaging three or more stakeholders at the same account, known as multi-threading, closes deals roughly twice as fast. The effective pattern is to start with your champion, then introduce the economic and technical buyers a few touches later with messages tailored to each role, so the deal does not depend on any one person.
Bringing it together

Finding decision-makers at any company in 2026 means mapping a buying committee rather than hunting for one name. Learn the predictable roles, identify the economic buyer who holds the budget, use intent and engagement signals to find stakeholders while they are evaluating, and get verified contact data for the whole committee rather than just your champion. Then reach them in a coordinated, multi-threaded sequence with messages tailored to each role. Done this way, your deals stop depending on a single point of contact, which is what keeps them from stalling and your pipeline from thinning.

If you want help finding and reaching the full buying committee at your target accounts, book a call with the Novoslo team and we will show you exactly how it works.